Automatic motor stator lacing machine coil winding lacing machine
Double ends electric motor stator coil automatic lacing and binding
This Automatic motor stator coil lacing machine is consist of
machine body, needle, nozzle rotating part, needle fore and back
movement,nozzle swing part, needle up and down movement part,
stator indexing part,thread feeding,thread cutting part.
This stator coil lacing machine adopts servo driven system, CNC
control design and HIM program.
The indexing is driven by servo system.
Different lacing mode could be set such as slot lacing, interval
lacing, and fancy lacing.
Main spindle adopts servo control system.
The rotation speed can be set.
Two needles driven by servo system lace upper and lower coil
Machine can automatically feed thread and cut thread.
There is no need to tie a knot.
Tooling change is fast and convenient.
Stator stack length range is 50-130mm.
Lacing tension can be set, Production capacity ≤1s/slot.
Should be no copper wire snap and wire enamel broken.
Primary qualification rate ≥98.5%, after rework, the rate ≥99.5%.
This stator coil lacing machine adopts safety grating protection system.
Operator need to stand when operating.
The stator coil lacing machine is suitable for lacing the oven-hang
of the induction motor stator.
It is used for stator which meets the specification of below.
The stator coil lacing and binding machine is suitable for air
conditioner motor, washing machine motor, compression motor, fan
motor, generator motor and pump motor.
|Product name||Automatic motor stator lacing machine|
|Stator stack length||15~120mm|
|Min. stator ID||33mm|
|Max. stator OD||150mm|
|Pitch time||About 0.5~0.7sec/slot|
|Dimension||1600 x 700 x 1680mm|